- Reccords frequency
employing a high-performance digital Synthesizer method
- Measure wide frequency
: 9 kHz ~ 3.0 GHz
- Superior Resolution :
Minimum 1 Hz
- Compact and
lightweight package
- Pre Amp as standard
- Wide input Dynamic
Range : -130 dBm ~ 20 dBm
- Easy and simple Key
Buttons
- CDMA measurement
functions : ACPR, ACLR, OCBW, Channel Power
- Resolution Bandwuth
(RBW) : 1 kHz ~ 3 MHz (1-3 step), 9 kHz, 120 kHz
- Simple usage and
convenience 8 Markers, Trace function, Trigger function
- Support various types
of convenient interface
- GPIB in, REF out
functions
- Large capacity
internal memory for storing measured data
- Stores measured data
up to 900 events
- Stores Setup data up
to 3,000 events
- USB Host Port
- Supports USB Printer
- Stores data and
applied Image file (GIF) into USB Flash memory
- Ethernet Port and
Software (option) for Internet remote control
TECHNICAL
SPECCIFICATION |
Frequency |
- Range : 9 kHz to
3.0 GHz
- Resolution :
Minimum 1 Hz
- Span Range : 100
Hz/div to 300 MHz/div , Selection of 1, 2, 5 steps(automatic), ZERO
Span, Full Span ( 9 kHz to 3.0 GHz)
- Frequency
Selection : Start, Stop, Center, Span setup
- Span Accuracy :
+/-3% of the Indicated Span Width
- Readout Accuracy
: <= ± (Indicated frequency x Reference frequency
accuracy + Span x Span accuracy + 50% of RBW)
|
Amplitude |
- Phase Noise :
<=-90dBc/Hz (@ 10kHz offset) + 20 dBm ~ -105dBm, +20dBm ~ -130
dBm (Pre Amp
ON)
- Average Noise
Level (1kHz RBW, 10Hz
VBW)
< = -105 dBm 150 kHz ~ 2.7
GHz
< = -127 dBm (Pre Amp On) 20 MHz ~
2.7GHz
< = -100 dBm, -123 dBm (Pre Amp On) 2.7 MHz ~ 3.0GHz
< = -130 dBm (Pre Amp On) ; Typically
- Amplitude Unit :
dBm, dBmv, dBuV, V, mV, uV, W, mW, uW
- Display Scale
linearity
< = ±1.5 dB / 70dB (10dB/div),
< = ±1.5 dB / 40dB
(5dB/div),
< = ±0.5 dB / 8dB
(1dB/div),
< = ±0.5 dB / 16dB (2dB/div)
- Frequency
Response (0 dB attnuation)
:
-3.5 ~ 1.5 dB (100 kHz ~
10MHz)
±1.5 dB (10MHz ~ 3 GHz)
- Reference
Level
Range : -90 dBm to +20
dBm
]
Resolution : 0.1 dB
steps
Accuracy : ±1.5 dB
- Second Harmonic
Distortion : <= -60 dBc, -40 dBm input
- Inter modulation
Distortion : <= -70 dBc, -40 dBm input
- Residual
Spurious : <= -85 dBm (Input terminated, 0 dB attenuation)
- Other Input
Spurious : <= -60 dBc, -30 dBm input
- Resolution
Bandwidth
Selections : 1kHz , 3kHz , 10kHz, 30kHz, 100kHz, 1 MHz , 3 MHz, 9kHz,
120kHz
Accuracy : <=
±20%
Selectivity : 60 dB / 3 dB ratio <
5:1
60 dB / 6 dB ratio < 12 : 1 (9 kHz, 120
kHz)
Switching Error : <= ±1.0 dB (1kHz
Reference
RBW)
Video Bandwidth : 10 Hz to 3 MHz in 1-3-10 steps
|
SWEEP |
- Rate : 100 ms to
1000 sec
- Accuracy :
<= ±20%
- Trigger Source :
External (rear) , Video , Free Run , Line
- Trigger Modes :
continuous, single
- Trigger Level :
TTL Level
|
Storage |
- Trace Storage :
maximum 900 waveforms
- Setup Storage :
maximum 3,000 states
|
Screen Display |
- Type : 6.4"
color TFT LCD
- Display
Resolution : 640(H) x 480 (V) active display area
- Marker Modes :
Peak search , Delta marker, Marker to Center, Marker to Reference (8
Markers maximum)
|
Input |
- RF Input
Connector : N-type female , 50 ohm nominal
- VSWR : 150 kHz
to 3.0 GHz, VSWR < 1.5 : 1(with 0 dBm Reference Level)
- Maximum input
level : 50 Vdc, +20 dBm
|
Standard
Frequency (10MHz, Ref.) |
- Temperature
Stability : ±0.5 ppm
- Aging :
±0.5 ppm/Year
- Connector : BNC
female
- Connector : BNC
female
- Input Level : -5
dBm to +15 dBm
- Output Level :
10 MHz, +8 dBm nominal
|
Interface |
Driver : PCL Command, HP, EPSON, Laser-Jet,
desk-Jet
Connector : for standard 25 pin female D-Sub parallel printer, support
USB
USB HostPrinter Driver : PCL Command, HP, EPSON, Laser-Jet,
desk-Jet
USB Storage Device : Support 1.1 and 2.0 for storing image file,
supports GIF format
- Ethernet
(Option) : 10-Base-T Ethernet remote control
- GPIB
Interface(Option) : IEEE488 bus
|
GENERAL
SPECIFIC ATIONS |
- System size :
350(W) x 195(H) x 370(D) mm
- System Weight :
10 kg
- Input Voltage :
100 ~ 240 VAC at 50/60 Hz
- Operating
Temperature : 0 C to 40 C
- RF emissions :
EN 55011, FCC PART15 Section 15, 101
- RF Immunity : EN
61326
|
- Power Cord
- Operating Manual
- Tracking Generator
- CDMA (CDMA2000, WCDMA)
Signal Generator
- GPIB Interface (IEEE
488 Bus)
- ETHERNET Interface ;
for Internet Remote Control
- Soft Carrying Case
- General KIT Set
- CATV KIT Set
- Return Loss Bridge KIT
Set
|